Bike hand signals are an essential part of safe cycling as they communicate your intentions to other cyclists, drivers, and pedestrians on the road. Using the wrong hand signal or failing to signal at all can lead to confusion and accidents. In this post, Iโve put together a comprehensive guide on how to signal turns correctly on a bike so you could keep yourself and others safe on the road.
Now, I know what youโre thinking. โHand signals? How hard can they be?โ Well, my friend, the truth is that proper signaling can be the difference between a safe ride and a dangerous one. With this guide, youโll learn the importance of using hand signals and how to properly signal your left and right turns to others.
How do you signal turns on a bike? To signal turns on a bike, you can use hand signals. For a left turn, extend your left arm straight out to the side. For a right turn, extend your right arm straight out to the side, or alternatively, raise your left arm and bend it at the elbow so that your hand points upward. To signal a stop, extend your left arm downward, with your palm facing behind you.
Why are bike hand signals important?
Bike hand signals are important for a few reasons. First, they help ensure safe cycling by communicating your intentions to other cyclists, motorists, and pedestrians. Clear signals can help prevent accidents and keep everyone on the road or path safe.

Additionally, using proper hand signals can also help you avoid traffic violations and potential fines. Finally, proper hand signaling is just one aspect of responsible cycling, and following traffic laws and safety guidelines is essential for creating a positive cycling culture and promoting cycling as a sustainable mode of transportation.
State Bicycle Co. Black Label 6061

State Bicycle Co. Black Label 6061
How do you use bike hand signals while turning?
As a cyclist, knowing the proper hand signals is crucial for communicating with other drivers on the road. Here are some of the primary bike hand signals that you should know to stay safe on the road:
Left turn signal
To signal a left turn, extend your left arm to your side for three seconds, about 100 ft before you turn. The fully extended arm is enough to alert motorists and other road users of your turning intent. Place your hand back on the handlebars when you make the turn.
Right turn signal
You can signal a right turn in two different ways. The first method is to extend your right arm to your side the same as the left turn signal. However, check with your state first, as some do not allow it. The other method is to extend your left arm to the side and raise it to a 90ยฐ angle.

Stop signal
To signal that you are stopping, extend your left arm down to your side with your palm facing backward. This signal warns drivers behind you that you are slowing down or coming to a stop.
Remember to make eye contact with drivers and other cyclists on the road after using these signals. This will help ensure that they see and understand your intentions.
What should you do if a cyclist ahead is signaling to turn?
If a cyclist ahead is signaling to turn, you should slow down and give them plenty of room to make their turn safely. Do not try to pass them on the side they are signaling toward, as they may need to make a sudden turn or swerve to avoid an obstacle. Instead, wait until they have completed their turn and it is safe to pass.
If you are unsure of the cyclistโs intentions, you may want to wait until they have completed their turn before proceeding.
It is important to respect the cyclistโs space while they are signaling and turning. If you are unsure of the cyclistโs intentions, you may want to wait until they have completed their turn before proceeding. Remember to always be alert and aware of your surroundings when cycling to avoid accidents.
What other bike hand signals should you know?
In addition to left and right turns, there are other bike hand signals that you should know to ride safely on the road. One of them is the hazard signal, which involves extending your left arm out to the side and pointing to the hazard with your index finger.
Another one is the group hand signal, which is used to communicate with other riders in a group. This signal involves pointing out any obstacles or hazards on the road to the riders behind you using hand and arm signals.
Itโs worth noting that the hand signals for right turns may differ depending on the state. Some states allow cyclists to extend their right arm to signal a right turn, while others do not. In such states, you may use an alternative technique, such as extending your left arm to the side and then turning it up at a 90ยฐ angle to signal a right turn.
If you want even more tips and insights, watch this video called โBasic Hand Signals for Cyclistsโ from the Lifesaver YouTube channel.
Conclusion
Well, folks, I hope youโre feeling more confident about how to signal turns on a bike now. Remember, itโs all about safety and communication out there on the road. So, let me ask you, did I cover everything you wanted to know? Let me know in the comments section below (I read and reply to every comment).
And if you found this article helpful, donโt be shy โ share it with a friend who could use some tips on staying safe while cycling. And while youโre at it, why not check out my full blog for more tips and tricks on all things fixie? Thanks for riding along with me today, folks. Now, get out there and pedal your way to adventure!
Key takeaways
This article covered how to signal turns on a bike. Here are some key takeaways: